Warning: Bullet selections are specific, and loads are not valid with substitutions of different bullets of the same weight. Variations in bullet length will alter net case capacity, pressure and velocity. Primer selection is specific and primer types are not interchangeable. These are maximum loads in my firearms and may be excessive in others. All loads should be reduced by 5% as a starting point for development where cartridges have greater than 40 grains in capacity and 10% for cartridges with less than 40 grain capacity following safe handloading practices as represented in established mainstream reloading manuals. Presentation of these loads does not constitute a solicitation for their use, nor a recommendation.
Cartridge – 35 Remington |
|
Firearm | Marlin 336 |
Barrel Length | 20.00″ |
Min – Max Case Length | 1.920″ +0.000″/-0.020″ |
Min – Max COL | 2.460″ – 2.525″ |
Primer | Remington 9 1/2 |
Bullet Diameter | 0.3590″ +0.000″/-0.0030″ |
Reloading Dies | RCBS + Lee Factory Crimp |
SAAMI MAP |
33,500 PSI |
Bullet Type | Bullet Weight Grains |
Net H2O Grains Capacity |
COL” | Powder Type | Powder Charge Grains |
Muzzle Velocity fps |
Muzzle Energy ft/lbs |
Hawk FP 0.025 |
180 |
42.2 |
2.350 |
Reloder 10x |
36.5 |
2329 |
2169 |
Hawk FP 0.025 |
180 |
42.2 |
2.350 |
H4895 |
41.5 |
2318 |
2148 |
Speer Hot-Cor SPFN | 180 | 42.9 | 2.470 | AR-Comp | 37.5 | 2130 | 1814 |
Speer Hot-Cor SPFN | 180 | 42.9 | 2.470 | H335 | 39.0 | 2136 | 1824 |
Hawk FP 0.025″ |
200 |
41.1 |
2.500 |
Varget |
40.0 |
2143 |
2039 |
Hawk FP 0.025″ |
200 |
41.1 |
2.500 |
IMR 3031 |
38.0c |
2199 |
2148 |
Hornady FTX | 200 | 37.9 | 2.500 | AR-Comp | 34.5 | 1979 | 1740 |
Hornady FTX | 200 | 37.9 | 2.500 | X-Terminator | 36.5 | 1975 | 1733 |
Speer Hot-Cor SPFN | 220 | 38.8 | 2.470 | AR-Comp | 34.0 | 1944 | 1847 |
Speer Hot-Cor SPFN | 220 | 38.8 | 2.470 | Norma 201 |
35.5 | 1937 | 1833 |
Email Notification