I set up Real Guns as a way to convey more or less positive firearms information, without the influence of: advertising, anti-gun pressure or the need to attract an audience. Anyone who feels there is value to the site’s contents are free to read the material. Anyone who thinks the […]
Author: by ©RGI Media, Inc - Published with permission
Revisiting the Thompson Center Contender Part III, but first...
I wanted to provide some updated information on loads for the .338-378 Weatherby, now that I’ve had a chance to work with Hodgdon H870. 123.0 grains H870 250 grain Sierra spitzer soft point boattail CCI #250 large rifle magnum primers Avg. MV 3,210 Avg. group size 3 shots well under […]
Revisiting the Thompson Center Contender Part II
Sorry I’m about a week over deadline. I was just never able to convince the folks at Midway USA that three weeks for shipment isn’t quite the same as second day air, used or refurb repacked scopes shouldn’t be shipped to customers as new items, and product with missing parts […]
Revisting the Thompson Center Contender
A Contender is an interesting firearm. It would seem too short to be a proper rifle, too long to be a proper pistol, and maybe an unnecessary compromise at both ends of the spectrum. In fact, it would seem shooting competition with this type of gun is just that, competition […]
Tightening up reload specs & building a throat clearance gauge
I know this sounds odd, but I think I’ve just found the most cost effective way to improve the quality of my reloads – I put a new top on my reloading bench. I began noticing that simple operations like removing spent primers, or taper crimping assembled rounds was getting […]
Workshop Decompression...a lathe arrival
I was pleasantly surprised by the condition of the lathe crates when UPS dropped them off. Only one splintered protective board, one slightly suspicious hole through the top right side and no damage to the goods inside. Our local Sunnyvale UPS damage rate was running a consistent 70%, 7 out […]
SAAMI, QuickLoad, lever action rifles and other curiosities....
There are two questions I receive with some frequency 1. What are the pressure signs to look for when loading widely accepted, yet highly suspected, high pressure .45-70 loads in the 1895 Marlin ? 2. When do I anticipate developing some class ? I thought I would attempt to address […]
Alternative Metal Finishes II
When I raced cars, I’d spend endless hours building and refining the motion parts, but spent not a minute improving the aesthetics of the package. Consequently, my cars were fast, but they looked like flying refuse. Refining, refurbishing and refinishing are games of patience and skill, in fact, there may […]
Alternative Metal Finishes - Part I
‘ve owned some of my firearms for so long, they have become a part of my personal history. I try to use them as frequently as possible, and I hate when they fall into a state of disrepair. One such rifle is a 42 year old Mohawk Brown Remington Nylon […]
Ruger's M77 Hawkeye Compact Rifle - 6.8 SPC
The Ruger M77 Hawkeye Compact Rifle is one of those guns where extracting it from the open end of a shipping carton takes a lot less time than expected. In fact, the rifle is so compact (How compact is it, Joe) it might be the basis for a new category […]